Is it easy to change wheel bearing in dodge intrepid?

not the front one ,it isn%26#039;t easy to do at all, those press in and the spindle has to be removed to do this,if its rear one its a lot easier but the fronts are a lot harder to do,and unless you have a press and know how to do this,you could mess the spindle up or even break it,i have seen a lot of those break when a new bearing was being pressed in,so be careful when doing this one,good luck.|||your welcome,yes its a better to let a shop do this one,this way their responsible for it if it breaks,good luck.

Report Abuse

|||that is wrong the front wheel bearings are bolted in but you need to unbolt the lower ball joint and the nut on the axel .

Report Abuse