How do i change a wheel bearing on a 98 dodge avenger?

i cant get the four bolts off the back of the wheel bearing there is not enough room to get a wrench or socket
How do i change a wheel bearing on a 98 dodge avenger?
you have to remove the lower ball joint nut and remove the spindle from the lower control arm then you can remove the axle and get to the bolts,you need a repair manual if you continue to work on this one,good luck with it.
How do i change a wheel bearing on a 98 dodge avenger?
You will probably have to take some suspension parts off.

You also may need a socket extender that will bend (I forgot the name of it)

I found front and rear hubs for you at:

Front: http://mibearings.com/wheel-bearing/5131鈥?/a>

Rear: http://mibearings.com/

They are USA made, and I suggest them

Good Luck!

red acne spots on face

ittwit

How do i change a front wheel bearing on a vauxhall astra coupe?

The car is a 1.8 and five stud with abs - can anyone tell me how easy it is to do or how to do it please?
How do i change a front wheel bearing on a vauxhall astra coupe?
It is a serious job that needs doing right. Not being funny, but if you need to ask how to do it then you aren't qualified to do it; at the end of the day, it's your safety that matters. You wouldn't want your wheel falling off whilst doing 70mph on the motorway would you?



Take it to a local mechanic. Doesnt need to be a main dealer.
How do i change a front wheel bearing on a vauxhall astra coupe?
go to halfords and buy the 'haynes workshop manual' for your car, they have all of them. with this book you can dismantle your entire car and fix any problem, and they have lots of handy hints in them.

haynes are the best.they are about 拢20.



good luck.
You phone the AA and sit back and wait.
Save a lot of hassle and take it to a mechanic.

Does a bulge in front tyre sound like a faulty wheel bearing noise when travelling?

my volvo v70 (99) has a nearside front noise. sounds like wheel bearing but doesnt change pitch when turning left or right like it normaly does. i know volvos have complex front bearings which may account for it not changing pitch. please help as bearing is pricey and i dont want to waste money.
Does a bulge in front tyre sound like a faulty wheel bearing noise when travelling?
The bulge is a safety critical fault. Replace it ASAP. It is caused by internal structural failure, meaning you may have kerbed it. Thus the wheel bearing has taken a hit too. Tyre first, bearing may need replacement, also the hub might be bent, and the knuckle out of alignment.
Does a bulge in front tyre sound like a faulty wheel bearing noise when travelling?
Not the bearing. The noise would usually become louder when placing a load on the wheel.



Bulge in tire? not likely. May be your brakes rubbing.
you have a bearing going or you have tyre separation, result a blebb, its easy to rule out a tyre by looking ,a bearing is a little bit more complex so its a process of elimination.
i would worry more about the bulge in your tire before the noise.
the easiest way to check if there is play in the wheel bearing is to jack up the car place one hand on the top of the wheel one on the bottom and try to move the wheel towards and away from you if there is no lateral movement then your wheel bearings are ok, are your wheel bolts tight.

And if there is a bulge in your tyre replace it before it bursts and creates an accident creating more trouble and expence.
If you think that you may have a bulge on a tyre,check that immediately,check the wheel bearings by checking side play with the wheel off the bottom.

better still get it checked at a garage.but if your worried about being stung be there when they check it.
Easy way to check your suspicion yourself, put your spare wheel on the nearside front. if the noise goes away then it was the bulge, if it does not, then it was not. Take you 1/2 hour at very most.

How do you change the front passenger wheel bearing on a 94 mustang?

I need DETAILED instructions and all the tools/parts (other than new bearing which i already have duh). Its a V6 with a 3.8. i feel it vibrating when im going about 30 and turn the wheel to the right.
How do you change the front passenger wheel bearing on a 94 mustang?
While a wheel bearing can cause the symptoms you're experiencing I would do a better check to determine that it definitely is the cause, if you haven't already. Here is a link that should help you with your installation:

http://www.autozone.com/autozone/repairi鈥?/a>
How do you change the front passenger wheel bearing on a 94 mustang?
go to a parts store and buy a Haynes manual. It will even have pictures.

How to change the rear wheel bearing on a Tiburon?

Any diagrams, pics, step by step guide, links?
How to change the rear wheel bearing on a Tiburon?
Never did it on a hyundai, but probably similar to most FWD cars.



Remove the wheel, then the brake caliper, then the brake rotor. Then your wheel hub should be exposed. Probably 3 bolts holding it on. Get the bolts loose. If the hub is frozen, give it some firm blows with a 3# sledge and chisel on each side until it pops off. Installation is reverse of removal.



You'll have to replace the entire wheel hub, they don't make it the old school way anymore with servicable bearings. Probably looking at $40-$60 for the part.
How to change the rear wheel bearing on a Tiburon?
All done. Runs great!

Report Abuse

Actually a lot of newer foreign cars have the bearings pressed in place and you need a shop press to remove and install... Entire spindle needs to be removed to do this... But I can't remember if a tiburon has this in the rear, I know subaru rear bearings are pressed in ... An easy way to tell is to see if there are bolts in the back of the spindle, usualy 3 or 4



If they are bolted on, this is simple, ... Well just follow the other persons instructions

I 'm changing my rear wheel bearing but its hard to take it out what can i do? ?

i have a 2000 ford focus se
I 'm changing my rear wheel bearing but its hard to take it out what can i do? ?


See above about the shop manual ....



Did you know this was part of a Ford Recall on this ?



F.Y.I
I 'm changing my rear wheel bearing but its hard to take it out what can i do? ?
If its a whole bearing ( wheel hub bearing) take a chisel and pound out behind the hub between the hub and spindle.
A night school course on car mechanics would be a good point to start.

You also need the tools to do it as well as the know how.

So why are you changing the bearings?
Get a shop manual for the car. It will give step by step instructions and indicate what tools are required for the task.

good fantasy name

cable tv to computer monitor

How do you change a wheel bearing on a roller skate?

you have to buy a bearing pusher tool to get it out

i suggest the kryptonics one tool because each bit on it has a bearing pusher.